Telepresence t3, Room installation guide planning and initial steps, Tandberg – TANDBERG Telepresence T3 User Manual
Page 4: Whit e
Advertising
PAGE 4/22
119077.01 TELEPRESENCE T3 ROOM INSTALLATION GUIDE 12.08
TANDBERG
Telepresence T3
WAll fiNish
•
All 4 walls should be painted white.
•
The finish should be flat and without holes, but need not be totally perfect.
•
Make sure there are no cables visible behind the blue wall.
•
No holes must be made higher up and no wall outlets must be mounted
higher up than 10 cm (4”) above the floor.
ROOM INSTALLATION GUIDE
PLANNING AND INITIAL STEPS
You may want to consult the document
room requirements for the requirements
on:
•
Heating, ventilation and air-conditioning
•
Electrical Outputs
•
LAN Outputs
•
Ceiling
The blue wall
Whit
E
Whit
E
Whit
E
WhitE
Advertising