Uniden Cordless Telephon - Manual (Page 17)

G E T T I N G S T A R T E D [ 16 ]
Entering Your Area Code
If you enter a 3-digit area code number in the “ Area Code ” option, your local area code
does not appear in Caller ID messages. For calls received from outside your local area code,
you will see a full 10-digit number.
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to “ Caller ID Setup ”,
then press select/ch.
3) Press + or - to move the pointer to “ Area Code ”,
then press select/ch.
4) Use the number keypad (0 to 9) to enter a 3-digit
area code.
5) Press select/ch, and you will hear a confirmation tone.
6) Press end to exit.
• If your calling area
requires 10-digit
dialing, do not program
this option.
• When the area code has
already been stored in
memory, the stored area
code will be displayed.
To change it, press
xfer/del three times.
Then enter the new area
code. Or you can use
/RocketDial/ or
call id/ to move the
cursor and edit the
area code.
TRU5865_OM_B6 7/17/02 4:08 PM Page 16