Uniden FP106 - Manual (Page 29)

Suggestion
• Make sure you use only the line cord
supplied with this telephone.
• Check that both ends of the telephone
line cord and Handset cord are plugged in.
• Plug another telephone into the
telephone socket and check for a dial
tone.
• Make sure the AC adaptor is plugged in
and the wall socket switched on.
• Make sure you do not have too many
telephones connected to the telephone line.
• Adjust the Ringer Volume Control.
• During speaker phone conversation,
adjust the speaker volume slider control
on the side of the telephone.
• Make sure the Handset Retainer Tab
has been turned around (point facing up)
and the Handset is placed firmly into the
cradle.
• All new calls must be reviewed before
the new call LED stops flashing.
• These are all subscription services.
To subscribe, or check the pricing and
availability, please contact your line services
provider.
• Make sure the AC adaptor is plugged in
and the wall socket switched on.
• Check / adjust the contrast control
setting as described on page 21.
• Make sure the AC adaptor is plugged in
and the wall socket switched on.
TROUBLESHOOTING
23
TROUBLESHOOTING
Problem
Can’t make or receive calls.
Caller Display feature not working
Pre-programmed features not working.
Blank or faint LCD screen.
Speaker phone or display not working.
No Dial Tone.
Can’t hear the telephone ringing.
Speaker phone volume is too low.
Handset does not hang up in the wall
mount position.
New Call LED keeps flashing.
If your telephone is not performing to your expectations, here are some suggestions on
how to resolve the problem.