Asus T5-P5G41E - Manual (Page 45)

3-7 ASUS T5-P5G41E
4. Serial ATA connectors (7-pin SATA1~4)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s
hard disk drives and optical disk drives. The Serial ATA 3Gb/s is backward
compatible with the Serial ATA 1.5Gb/s specification. The data transfer rate of
the Serial ATA 3Gb/s is faster than the standard parallel ATA (133 Mb/s).
P5QP18L
SATA1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
SATA2
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
SATA3
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXP3
RSATA_RXN3
GND
SATA4
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXP4
RSATA_RXN4
GND
P5QP18L SATA connectors
Install the Windows ® XP Service Pack 2 or later version before using Serial ATA.
5. USB connector (10-1 pin USB5)
This connector is for a USB 2.0 port. Connect the USB module cable to
this connector, then install the module to a slot opening at the back of the
system chassis. This USB connector complys with USB 2.0 specification that
supports up to 480 Mbps connection speed.
Never connect a 1394 cable to this USB connector. Doing so will damage the
motherboard!
The USB module cable is purchased separately.
P5QP18L
USB5
GND
USB_P5+
USB_P5-
USB+5V
PIN 1
P5QP18L USB2.0 connector