Uniden DECT2185 - Manual (Page 19)


Using Call Transfer
To... From the base From a handset
transfer a
call
Press FIND hANDSET/INTErCOM to
put the call on hold.
1. Press CLEAr/INTErCOM to
put the call on hold.
1.
Select the station you want to transfer the call to, or select
All to page all the stations at the same time.
When the other station accepts the call, you'll be disconnected,
but you can join the call again.
2.
cancel a
transfer
Press SPEAKEr to return to the
call.
Press TALK/FLASh to return to
the call.
accept a
transferred
call
To answer the page & speak to the transferring station, 1.
press FIND hANDSET/INTErCOM . press CLEAr/INTErCOM.
To accept the call, 2.
press SPEAKEr . press TALK/FLASh .
Using the Intercom
Here are some things you need to know about using the intercom:
Whenever the phone is in standby, you can make an intercom call
between stations without using the phone line.
You can make an intercom call from any station, but only two
stations can be in an intercom call at any time.
If an outside call comes in during an intercom call, the phone shows
the CID information. If the other station hasn't answered the page,
the phone cancels the page so you can answer the incoming call.
To... From the base From a handset
make an intercom
page
Press FIND hANDSET/INTErCOM . 1. Press CLEAr/INTErCOM . 1.
Select the station you want to talk with, or select All to
page all the stations at the same time.
2.
cancel a page Press FIND hANDSET/INTErCOM. Press END .
answer an
intercom page
Press FIND hANDSET/INTErCOM or
SPEAKEr .
Press CLEAr/INTErCOM or
TALK/FLASh .
leave an intercom
call
Press FIND hANDSET/INTErCOM. Press END .
answer an outside
call during an
intercom call
Press SPEAKEr. Press TALK/FLASh .


