Uniden SC200 User Manual
Page 30
4.
Enter the higher limit of your search range.
5.
Press
.
6.
Press
/
BAND to begin the search between the
two limits.
Using the Limit Search
1.
Press
/
BAND to enter Limit Search mode.
2.
Press
or
to stop searching. (”HOLD”
appears on the display.)
VFO Search
You can search by using the VFO control.
1.
In Manual mode, enter the frequency by using the
number keypad and turn VFO control.
-- OR --
In Band Search Hold or Limit Search Hold, enter the
frequency by using the number keypad, and turn the
VFO control.
“ V ” appears on the display.
2.
Turn the VFO control clockwise to move up the
frequency step, and turn the VFO control counter-
clockwise to move down the frequency step.
3.
When you wish to store frequency or change the
channel, you need not press
first.
Search Skip Frequency
The scanner may stop at certain frequencies during
Search that you do not want to hear. You can program
up to 50 Skip Frequencies into the SportCat. When the
scanner stops at one of these frequencies during
Search, press
. That frequency is now “memorized”
and will be skipped during any Search. The scanner will
then search to find other active frequencies. If you enter
the 51st frequency, the 1st one is overwritten.
28
30
C:...UC303ZL(SC200).VP
Mon Mar 18 17:34:16 2002
Color profile: Disabled
Composite Default screen