Setting system attenuation (trunked systems only), Deleting systems, Copying systems – Uniden BC246T User Manual
Page 70: Setting system attenuation (trunked systems, Setting system attenuation, Trunked systems only), Programming/editing optional settings
70
Programming/Editing Optional Settings
Setting System Attenuation
(Trunked Systems Only)
program system
E
Select the system
E
Set ATTENUATION
E
This setting controls whether the attenuator will be on or
off for the current system. Select your setting then press E.
Off
- the attenuator is off.
On
- system frequencies are attenuated by about 18 dB.
Notes:
• Turn on this setting if you are near strong signal
sources. Attenuation can help reduce interference
and desensitization that strong signals create.
• You can also turn this setting on or off by holding on a
trunked system, then pressing
+ E.
Deleting Systems
program system
E
Select the system
E
Delete System
E
The scanner prompts you to confirm deletion. To confirm,
press E. To cancel, press No.
Notes:
• Deleted systems cannot be restored. You must
re-enter them.
• You cannot restore preloaded systems.
Copying Systems
To copy a system including all settings, groups, and
channels:
Menu
Func
Menu