Uniden DSS7805 User Manual
Page 4
(3)
Step 2: Connect the Charger
Step 3: Register the Handset
1
2
3
4
1
2
registration.
3
Connect the AC adaptor to
the
jack and to a
standard
wall outlet.
Set the charger on a desk or
tabletop, and place the
handset in the charger with the
keypad facing forward.
Make sure the
LED
illuminates. If the LED does
not illuminate, check to see
that the AC adaptor is plugged
in and that the handset makes
good contact with the charger
charging contacts.
• Use only the supplied AAD-210AC adapter. Do not use any
other AC adapter.
• Place the charger close to the AC outlet so that you can unplug
the AC adaptor easily.
Charge the handset for 15-20 hours before using.
Be sure the handset battery is
fully charged.
With the main base in standby
mode (i.e., not being used),
place the extra handset in the
main base unit to begin
While the handset is registering,
will
appear in the LCD. When
is
displayed, the handset has been
registered to the base. If
appears,
please try these steps again.
DC IN 9V
240V AC
charge
YOU NEED TO REGISTER THE DSS7805 TO THE MAIN BASE BEFORE USE!
Handset Registering
Registration Complete
Registration Failed
DSS7805
DSS7805
DSS7805
DSS7805