Uniden BC355C - Manual (Page 26)


KEY PURPOSE
PROg Press this key to initiate and complete
programming a channel or frequency
(further detail is provided in a later section).
Note: If you press a non-
programmable bank key (WX, or
Cb),”Error” will be displayed; press a
programmable bank key .
ITEM PURPOSE
VOlUME
Control/Power
Switch
Turn this control clockwise to turn on the
BCC unit. Continue turning this control
clockwise to adjust the volume.
Sq (Squelch)
Control
Adjust Sq to set the scan threshold. When
you are monitoring a single channel in
Manual Mode, adjust Sq to eliminate the
background noise heard in the absence of an
incoming signal.