Mounting viewsonic lcd tv to the wall – VIEWSONIC VS12114-1M User Manual

Page 17

Advertising
background image

ViewSonic N1630w

12

ENGLISH

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775

Getting Started

Mounting ViewSonic LCD TV to the wall

The LCD TV can be used in a free standing position or wall-mounted. Before installing the

product to the wall, please consider the following guidelines:

• Read the Important Safety Instructions, at the start of this manual.

• Do not install in a moist or wet environment. This equipment is intended for indoor use.

• Do not install near heat source, or strong magnetic fields.

• Use only ViewSonic approved wall-mounting brackets to support the LCD TV weight.

• Before attaching the wall mount plate to the back cover, ensure the product is working.

• If your LCD TV is already set up for free-standing operation, you need to first remove the

stand before mounting the device to the wall.

To attach the wall-mount bracket to LCD TV safely, please use the following guidelines:

• Disconnect the power and any other cables that might hinder moving the LCD TV.

• Set the LCD TV on a table or work surface, placing the screen face down on a towel or

woolen blanket to protect the screen surface from damage while installing plate.

• Before installing the LCD TV on the wall, ensure you have recorded the product serial

number on page (i) of the User Guide, as you will need the serial number to request

service should there be a service need.

• Install the wall mount plate to the LCD TV using screws NO LONGER than 10mm, as

longer screws found in universal (non-ViewSonic) wall mount kits may damage the

power supply causing the unit to fail. The wall-mount screw type is M4 x L10.

• Mount the wall mount bracket to the wall ensuring use of proper screws to support the

installation. Ensure there is at least 3cm of space surrounding any air-vents of your

LCD TV to allow adequate cooling during operation.

• Hang the LCD TV wall mount plate to the wall mount bracket, completing installation.

Enjoy your ViewSonic LCD TV!

Advertising