VIEWSONIC WPG-360 - Manual (Page 23)

ViewSonic WPG-360 16
If you see this message (or anything
similar from your antivirus program)
when running WPG, please click
‘Unblock’ to allow WPG client software
to access network, or WPG client
program will not be able to work
properly.
WPG will auto detect ‘Server IP’ and
‘User Name’, please input login code as
shown on instruction page.
If login code is correct, application
software will appear.
NOTE:
‧
If your computer display’s resolution is not 1024x768, you’ll receive a message:
Click ‘Yes’ to adjust your computer display’s resolution automatically, or click ‘No’ to keep
original resolution, but some display area on projector may not able to be used.
‧
If no WPG is found on your network, please check if WPG device is turned on or Ethernet
cable is well-connected.