Vizio GV47L - Manual (Page 10)

VIZIO GV47L FHD TV User Manual
Version 5/18/2007 10
www.VIZIOCE.com
Chapter 1 Basic Controls and Connections
1.1 Front Bezel
Power ‘VIZIO’ light – The VIZIO name lights white
when powered on and orange when powered off.
Remote Control Sensor – This is the window through
which all of the remote control signals pass to the
sensor. Point the remote control directly at this
window for the best response to the remote signal.
1.2 Sensor Touch Controls
The GV47L FHD TV is equipped with Sensor Touch Controls that are hidden behind the bezel and
remain asleep until you need to use them.
Power ( ) – Switch the GV47LHDTV on by pressing the Sensor Touch area to activate the Controls
and then press the power switch location once. Press again to turn the GV47LHDTV off.
Menu – This Control activates the On Screen Display (OSD). If a sub-menu is active, pressing this
Control will return to the previous menu level.
Channel +/- – Use these Controls to step up or down the TV channels. While the OSD is active, these
function as up and down controls in the OSD menus.
Volume +/- – Use these Controls to increase or decrease to the speaker volume. While the OSD is
active, these function as left and right controls in the OSD menus.
Input (Enter) – Repeated pressing of this Control steps through the input sources in the following
sequence: TV, AV1, AV2, Component 1, Component 2, RGB, HDMI 1 and HDMI 2. Once you have
stepped through the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this Control confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.