Velodyne Acoustics SPLI SERIES SPL-1000I - Manual (Page 10)

Speak er -Le v el Connections
7
.
w w w . v e l o d y n e . c o m
SPLi Series User’s Manual
Figure 3 shows an easy way to connect your Velodyne subwoofer directly to your receiver or
integrated amplifier, if it lacks line-level outputs. You may also connect your satellites directly to
your receiver or amplifier along with the subwoofer. Your receiver or amplifier will not notice the
additional load of the subwoofer due to the high input impedance.
Figure 3. Installation Using Speaker-Level Inputs
Caution!!! To avoid damage to your main amplifier, be sure to maintain correct polarity
when making all connections. Red (positive) to red, and black (negative) to black. Be
sure that all connections are tight, and that there are no loose strands or frayed wires.
NOTE: SPL-800i is
identical in features
and layout to the
SPL-1000i shown.