White Rodgers 1F95W-71 - Manual (Page 24)

24
ENTERING YOUR PROGRAM
Follow these steps to enter the heating/cooling
program you have selected.
We recommend that you remove the thermostat
from the wall for programming (especially for
entering cooling programming). A fresh 9 volt
Energizer
® alkaline battery must be installed to
perform off-wall programming. USE SYSTEM
HEAT - OFF - COOL - AUTO
TO
TURN THE THERMOSTAT OFF BEFORE RE-
ATTACHING THE THERMOSTAT TO THE
SUBBASE!
You cannot program the thermostat with the
SYSTEM SWITCH in the AUTO position.
Set Current Time and Day
1. Press SET
CLOCK
once. The display will show
minutes only.
EXAMPLE:
2. Press and hold either TIME
FWD or TIME
BACK
until you
reach the correct minutes.
3. Press SET
CLOCK
once. The display window will
show the hour only.
EXAMPLE:
4. Press and hold either TIME
FWD or TIME
BACK
until you
reach the correct hour and AM/PM desig-
nation (AM begins at midnight; PM begins
at noon).
NOTE