Whirlpool ADVANTECH CL-8 - Manual (Page 79)

Firmware Update
70
Firmware Update
Downloading Firmware to PDA
1. Whirlpool Corp makes critical updates to
embedded control programming available to users
of the product.
2. Updates can be performed on previously installed
units using properly programmed PDAs & the
ADVANTECH™ Back Office Software installed on
a PC: (Whirlpool Pt# 8524744B)
3. PDA devices need to operate on a Palm
®
OS of
3.5.0 to 4.0.0
4. Firmware must be downloaded from the Internet at:
www.cltpsc.whirlpoolcorp.com/techinfo/tech_support/firmware/firmwaredefault.htm
5. Place the downloaded file onto the computer
Desktop where it can be unzipped easily.
6. Unzip the file and place it in the computer
ADVANTECH/Add-on folder.
7. Boot-up the ADVANTECH ™ software application
8. Select the PDA Sync button
9. Select Advanced Sync Features
10. Select Import Reprogramming File
11. Locate the Firmware file on your computer where it
was placed: C://Programs/ADVANTECH/Add-on
Then select the appropriate firmware file.