Whirlpool 3950319 - Manual (Page 5)

5
USING YOUR
WASHER
Understanding Washer Cycles
When the Cycle Control knob is set to a number and pulled
out, the washer fills (to the selected load size) before
agitation and timing start. The washer begins agitating
immediately after filling; agitation occurs with the washer
lid up or down.
During agitation, the agitator (on some models) creates a
continuous rollover action that provides a thorough
cleaning of the wash load.
After agitation starts, the Cycle Control knob turns
clockwise until it points to an OFF area and the cycle ends.
NOTE: The washer pauses briefly throughout each cycle.
These pauses are normal for washer operation.
Loading
Loading suggestions
For these suggested full-sized loads, set the LOAD SIZE
selector to the highest load size setting.
WASH RINSE
1. Fill 1. Fill
2. Wash
selected
time 2. Rinse
3. Drain †
No agitation
3. Drain
No agitation
4. Spin 4. Spin-Spray
rinse
5. Spin
† The Permanent Press
cycle partially drains, fills,
agitates briefly, and
drains.
6. Off
SUPER CAPACITY PLUS WASHERS
Heavy Work Clothes
3 pair pants
3 shirts
4 pair jeans
1 coverall
1 overall
Delicates
3 camisoles
1 quilted robe
4 slips
4 panties
2 bras
2 nighties
1 baby’s dress
Towels
10 bath towels
10 hand towels
14 wash cloths
1 bath mat
Mixed Load
3 double sheets
4 pillowcases
8 T-shirts
6 pair shorts
2 shirts
2 blouses
8 handkerchiefs