Zoom ADSL X4 - Manual (Page 36)

36 ADSL X4 User’s Guide
Status Buttons
The buttons in the Status group are typically used for maintenance
and troubleshooting.
The following table lists each button in the Status group and gives
a brief description of the settings you can specify.
Click a button below, then click the Help icon at the top of the
screen to open an online help topic about the page you are viewing.
This button… Opens a page that lets you…
ADSL Status View in-depth information about your ADSL
connection.
PPP Status Configure a Point-to-Point Protocol (PPP) to
enable communication between the X4 modem
and your Internet service provider.
TCP/IP Status View information about the IP packets handled by
your modem.
EoA Status Configure an Ethernet-over-ATM (EoA) interface
on the ADSL/Ethernet router, if one is needed to
communicate with your ISP.
ATM Status Configure an Asynchronous Transfer Mode (ATM)
Virtual Circuit (VC) interface to enable the X4 to
communicate using the ATM protocol.
IPoA Status Configure an Internet Protocol over ATM (IPoA)
interface on the ADSL/Ethernet router. An IPoA
interface can be used to exchange IP packets
over the ATM network, without using an
underlying Ethernet over ATM (EOA) connection.