ZyXEL Communications P-660H-D Series - Manual (Page 305)

P-660R/H-D Series User’s Guide
Chapter 34 IP Policy Routing 304
Route 1 represents the default IP route and route 2 represents the configured IP route.
Figure 200 Example of IP Policy Routing
To force packets coming from clients with IP addresses of 192.168.1.33 to 192.168.1.64 to be
routed to the Internet via the WAN port of the Prestige, follow the steps as shown next.
1 Create a routing policy set in menu 25.
2 Create a rule for this set in Menu 25.1.1 - IP Routing Policy as shown next.
Figure 201 IP Routing Policy Example
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care Packet length= 10
Precedence = Don't Care Len Comp= Equal
Source:
addr start= 192.168.1.2 end= 192.168.1.64
port start= 0 end= N/A
Destination:
addr start= 0.0.0.0 end= N/A
port start= 80 end= 80
Action= Matched
Gateway type = Gateway addr Gateway addr = 192.168.1.1
Type of Service= No Change Gateway node = 0
Precedence = No Change Log= No
Press ENTER to Confirm or ESC to Cancel: