Yamaha CLP-280 - Manual (Page 42)

42
CLP-280/270 Owner’s Manual
Basic Operation
Recording Your Performance
Adjusting the volume balance between playback and your performance
[SONG BALANCE]
While recording multiple parts one by one, you can adjust the volume balance between the playback of the
recorded parts and your current performance.
Procedure
Some commercially-available
music data contains extremely
high volumes. When using such
data, please adjust the song
balance.
1.
Move the [SONG BALANCE] slider to the left or right
to make adjustments.
Recording in Dual or Split mode
When you record in Dual or Split mode, the Clavinova records each voice onto a separate part. The following
table shows how parts are assigned to each voice.
CAUTION
When you record multiple parts one by one, or when you record new data over an existing song (see page 40), the
existing data will be erased. Proceed with caution.
In the following example, RIGHT, LEFT, and EXTRA PARTS n have been selected for recording.
Note: Part n = Part 3 – Part 16
If “n+1,” “n+2,” and “n+3” exceed 16, Parts 1, 2, and 3 are used.
Switching between Dual and Split mode in a song is not recorded.
TIP
SONG BALANCE
SONG KEYBOARD
The song playback
volume will be lower. Your playing volume
will be lower.
Parts assigned for
recording
Dual Split Split+Dual
RIGHT LEFT EXTRA
PART n RIGHT LEFT EXTRA
PART n RIGHT LEFT EXTRA
PART n
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
Parts
used for
record-
ing
MAIN
(voice 1)
Part 1 Part 2 Part n Part 1 Part n Part 1 Part n
LEFT
(voice 1)
– Part 2 Part n+1 Part 2 Part n+1
MAIN
(voice 2)
Part 3 Part 4 Part n+2 – Part 3 Part n+2
LEFT
(voice 2)
– – Part 4 Part n+3
TIP