ZyXEL Communications P-2002 - Manual (Page 31)

P-2002 Series User’s Guide
Chapter 2 Introducing the Web Configurator 31
2.3 Resetting the Prestige
If you forget your password or cannot access the web configurator, you will need to reload the
factory-default configuration file or use the RESET button on the back of the Prestige.
Uploading this configuration file replaces the current configuration file with the factory-
default configuration file. This means that you will lose all configurations that you had
previously. The password will also be reset to “1234”.
2.3.1 Procedure To Use The Reset Button
Make sure the PWR/VoIP LED is on (not blinking) before you begin this procedure.
1 Press the RESET button for five to ten seconds (release it when the PWR/VoIP LED
begins to blink). When the PWR/VoIP LED starts blinking, the defaults have been
restored and the Prestige restarts. Otherwise, go to step 2.
2 Disconnect and reconnect the Prestige’s power.
3 Wait for the PWR LED to stop blinking and stay on steady.
4 Press the RESET button for five to ten seconds (release it when the PWR/VoIP LED
begins to blink). When the PWR/VoIP LED starts blinking, the defaults have been
restored and the Prestige restarts. Otherwise, go to step 2.
2.4 Navigating the Prestige Web Configurator
The following summarizes how to navigate the web configurator from the MAIN MENU
screen.
Note: Click the Help icon (located in the top right corner of most screens) to view
online help.
Click a link under ADVANCED to configure Prestige features.