ZyXEL Communications Prestige 660H Series - Manual (Page 8)

Prestige 660H and Prestige HW Series Compact Guide
8
3 Zero Configuration Internet Access
Any computer connected to the Prestige can access the Internet without
changing its network settings (such as the IP address and subnet mask).
Step 1. Make the hardware connections and turn on the Prestige (refer to
the Rear Panel section for your model).
Step 2. Wait until the DSL/ACT LED turns steady on. Launch your web
browser and navigate to a web site (for example,
www.zyxel.com ).
The Prestige automatically detects and configures your Internet
connection. This may take about two minutes.
Step 3. If you have a PPPoE or PPPoA connection type, a screen displays
prompting you to enter your Internet account username and/or
password. Enter the username, password and/or service name
exactly as provided by your ISP. Click Apply.
Step 4. You should be able to access the Internet. Otherwise, follow the on-
screen instructions to solve the problem(s). Refer to the rest of this
guide or the User’s Guide to manually configure your Prestige for
Internet connection and other advanced settings.
If an Internet access parameter changes, either change it
manually or restart the device to have the Prestige automatically
reconfigure your Internet connection.