ZyXEL Communications P-660R-Tx v2 Series - Manual (Page 76)

P-660R-Tx v2 Series User’s Guide
Chapter 7 Network Address Translation (NAT) Screens 77
Figure 26 NAT Mode
The following table describes the labels in this screen.
7.5 Configuring SUA Server
Note: If you do not assign an IP address in Server Set 1 (default server), the ZyXEL
Device discards all packets received for ports that are not specified here or in
the remote management setup.
Click NAT, select SUA Only and click Edit Details to open the following screen.
Refer to Table 16 on page 75 for port numbers commonly used for particular services.
Table 17 NAT Mode
LABEL DESCRIPTION
None Select this radio button to disable NAT.
SUA Only Select this radio button if you have just one public WAN IP address for your ZyXEL
Device. The ZyXEL Device uses Address Mapping Set 1 in the NAT - Edit SUA/NAT
Server Set screen.
Edit Details Click this link to go to the NAT - Edit SUA/NAT Server Set screen.
Full Feature Select this radio button if you have multiple public WAN IP addresses for your ZyXEL
Device.
Edit Details Click this link to go to the NAT - Address Mapping Rules screen.
Apply Click Apply to save your configuration.