Zoom ZoomAir IG-4150 - Manual (Page 7)

Chapter 1 About the ZoomAir IG-4150 7
5
Select a mode for the IG-4150 and configure its settings using
the Setup Utility.
Note: The IG-4150 is in the factory default mode – Cable Modem.
You can change the mode when you configure the device
(Chapter 4 or 5).
Network Options Overview
The IG-4150 is a Base Station that routes communication between
wireless computers and the Internet and/or other computer
networks.
You can use the IG to provide wireless Internet access and wireless
LAN or WAN communication in several ways. In this manual, we
refer to each method as a mode:
• Via Cable modem (the IG-4150 factory default mode)
• Via Telephone Line using the built-in 56K/V.90 modem
• Via ADSL modem (with PPPoE)
• Via ISDN/DSL device (for example, VDSL, HDSL,
IDSL, SDSL, and others)
• Via LAN Infrastructure
• Via [No Internet], if you do not want to use your IG-4150
for wireless Internet access (For instance, you may simply
want to connect the IG-4150 to your wired Ethernet
network.)