Z Microsystems SL - Manual (Page 16)

Doc# 27-0032UM Rev A Issued 07/05
16
CABLE CONNECTIONS
The connections panel may vary due to non-standard configurations. The following con-
figuration shows both PS2 and USB cable connections on one sample. In most cases, the
Command Console will utilize just one of these connector types.
VIDEO
HOST SERIAL
USB (TYPE B)
KEYBOARD , TRACKBALL
POWER
PS2
KEYBOARD TRACKBALL
When the Command Console is connected, apply power and ensure the main screen
appears. If the display does not turn on within ten seconds, press the Standby button on
the display panel upon completion of cabling. If the main screen does not appear after
hardware and cabling installations are complete, consult the Troubleshooting section of
this manual.
POWER UP
OPERATIONS