Yamaha CD Recordable/Rewritable Drive CRW2200S - Manual (Page 9)

1
SCSI connection and E-IDE (ATAPI) connection
The CRW2200 drive enables you to set either a SCSI connection or an E-IDE
(ATAPI) connection.
You can use the CRW2200 drive as a SCSI device by attaching the SCSI convertor
to the rear of the drive, you can also use the CRW2200 drive as an E-IDE device by
detaching the SCSI convertor.
Choose the connection method that applies to your computer environment.
For SCSI Connection
→
“SCSI Connection Set Up” (P. 12 – 31)
Attach the SCSI convertor to the CRW2200 drive.
In this manual, the drive plus the convertor is called the “CRW2200S.”
Notes
• For a SCSI connection, use the following items (included).
– SCSI convertor
– Screw
– Power cable
• The included SCSI convertor is for the CRW2200 drive only. Do not use it with any other
device. YAMAHA and its suppliers do not guarantee operation if it is used with any other
device.
For IDE Connection
→
“E-IDE (ATAPI) Connection Set Up” (P. 35 – 49)
Use the CRW2200 drive only.
In this manual, it is called the “CRW2200E.”
CRW2200 drive SCSI convertor CRW2200S
+ =
CRW2200E