Yamaha AX16-AT - Manual (Page 3)

3
AX16-AT—Owner’s Manual
Important Notices
• Do not place the AX16-AT in an area subject to excessive heat, direct sun-
light, excessive humidity, or dust.
• Keep the AX16-AT inside its antistatic bag until you are ready to install it.
• To prevent handling damage, hold the AX16-AT by the edges or bracket.
• If you accidentally touch the card edge connections, remove any finger-
prints using a dry tissue.
• Do not place objects on top of the AX16-AT, and do not put it down in a
place where other objects are likely to be placed on top of it.
• Before removing your computer’s cover, turn it off and remove the power
cord.
• To prevent static electricity damage, touch a grounded metal part of your
computer, such as the power supply case, before handling the AX16-AT.
Packing List
• AX16-AT Audio Expansion Card
• DS2416 20-pin connection cable x2
• ISA-bus mounting bracket
• This manual
Trademarks
ADAT MultiChannel Optical Digital Interface is a trademark and ADAT and
Alesis are registered trademarks of Alesis Corporation. Yamaha is a trademark
of Yamaha Corporation. All other trademarks are the property of their respec-
tive holders and are hereby acknowledged.
Copyright
No part of the AX16-AT Owner’s Manual may be reproduced or distributed in
any form or by any means without the prior written authorization of Yamaha
Corporation, Inc.
© 1998 Yamaha Corporation. All rights reserved.
Keep this manual safe for future reference!