Yamaha RX-V1000RDS - Manual (Page 75)

73
English
INTR
ODUCTION
PREP
ARA
TION
B
ASIC OPERA-
TION
ADDITIONAL
INFORMA
TION
ADDITIONAL
INFORMA
TION
APPENDIX
SOUND FIELD PROGRAM PARAMETER EDITING
■ RC.INIT.DLY (rear center initial delay)
Function: This parameter adjusts the delay between the direct sound and the first reflection in the rear center
sound field.
Control range: 1 – 49 msec
■ RC.ROOM SIZE (rear center room size)
Function: This parameter adjusts the apparent size of the rear center sound field.
Control range: 0.1 – 2.0
■ RC.LIVENESS (rear center liveness)
Function: This parameter adjusts the apparent reflectivity of the virtual wall in the rear center sound field.
Control range: 0 – 10
■ REV.TIME (reverberation time)
Function: This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to
decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an
extremely wide range.
Control range: 1.0 – 5.0 sec
Description:
Set a longer reverberation time for “dead” sources and listening room environments and a shorter time
for “live” sources and listening room environments.
60 dB
REV. TIME REV. TIME REV. TIME
60 dB 60 dB
Level
Time
Reverberations
Le
vel
Time
Sound source
Early reflections
Reverberations
Le
vel
Time
Reverberations
Short reverberations
Sound source
Long reverberations
Small value = 1.0 s Large value = 5.0 s
0112V1000RDS_69-74_EN 9/5/0, 4:44 PM 73