ZyXEL Communications 3G Wireless Router NBG410W3G - Manual (Page 7)

ENGLISH
7
3 Set Up a 3G Connection
This section shows you how to quickly configure and set up a 3G connection on the
NBG41xW3G. Leave any settings not mentioned at their default values or see the User’s
Guide for more information.
You should have ready the Internet access information for your activated 3G user account.
1 Click WIRELESS > 3G (WAN 2) in the NBG41xW3G’s navigation
menu.
2 Select Enable.
3 Check your device is set to the
correct 3G Interface.
4 Type the access point name
given to you by your 3G service
provider in the Access Point
Name (APN) field.
5 If your 3G service provider
gave you a user name and
password, select CHAP/PAP in
the Authentication Type field
and enter the user name and
password in the fields below.
Otherwise, set the
Authentication Type to None.
6 If your 3G service provider
gave you a PIN code, type it in
the PIN Code field.
7 Type the phone number given to you by your 3G service provider in the Phone Number
field.
8 If your service provider gave you an IP address for a 3G connection, select Use Fixed
IP Address and enter it in the My WAN IP Address field. Otherwise, select Get
Automatically from ISP.
9 Ensure Enable NAT is selected and click Apply.
8
9
4
6
5
7
3
2