Yamaha 006IPTO-F0 - Manual (Page 51)

Input and Output Patching
51
DM1000 Version 2—Owner’s Manual
4
Connections and Setup
• SURR XXX
(“XXX” is a channel name). .............. Surround Monitor Outs
• CR-L/CR-R ........................................... Control Room Monitor signals
• CAS BUS1–BUS8 ................................ Bus 1–8 Cascade Outs
• CAS AUX1–AUX8 ............................... Aux Send 1–8 Cascade Outs
• CAS ST-L/ST-R.................................... Stereo Bus Cascade Outs
• CASSOLOL/CASSOLOR ................... Solo Bus Cascade Outs
• SOLO-L/SOLO-R ................................ Solo signals
• M.MX XXX
(“XXX” is a channel name.) .............. Surround Monitor Outs
2 Use the cursor buttons to move the cursor to a patch parameter ( 1 ) you
wish to change, and rotate the Parameter wheel or press the [INC]/[DEC]
buttons to modify the patching.
3 Press [ENTER] to confirm the change.
Tip: To restore the default patching, recall Output Patch memory #00 (see page 177).