ZyXEL Communications P-660HW-D Series - Manual (Page 114)

P-660HW-D Series User’s Guide
113 Chapter 7 Wireless LAN
7.4.3 WPA-PSK/WPA2-PSK
In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless
LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security
Mode list.
Figure 59 Wireless: WPA-PSK/WPA2-PSK
WEP Key The WEP keys are used to encrypt data. Both the ZyXEL device and the wireless
clients must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII
string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 64-bit, 128-bit or
256-bit WEP key respectively.
Apply Click Apply to save your changes back to the ZyXEL device.
Cancel Click Cancel to reload the previous configuration for this screen.
Advanced
Setup
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
Table 34 Wireless: Static WEP Encryption
LABEL DESCRIPTION