Selecting the speaker system, Adjusting the balance control, Adjusting the bass and treble controls – Yamaha RX-V592 User Manual
Page 27: Using the bass extension switch, Using the tone bypass switch, English, Rx-v692 only
25
English
Selecting the SPEAKER system
Because one or two speaker systems (as main speakers) can
be connected to this unit, the SPEAKERS switches allow you
to select speaker system A or B, or both at once.
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
Note
This control is effective only for the sound from the main
speakers.
Adjusting the BASS and TREBLE
controls
BASS
: Turn this clockwise to increase (or counter-
clockwise to decrease) the low frequency
response.
TREBLE : Turn this clockwise to increase (or counter-
clockwise to decrease) the high frequency
response.
Note
These controls are effective only for the sound from the main
speakers.
Using the BASS EXTENSION switch
You can boost bass frequency response by setting this switch
to the “ON” position. This switch is effective only on the sound
from the main speakers.
Using the TONE BYPASS switch
RX-V692 only
Press this switch to revert instantly to the flat states of the
BASS and TREBLE controls without changing the setting of
these controls.
SPEAKERS
A
ON
OFF
B
BALANCE
5
5
4
3
2
l
0
l
2
3
4
L
R
BASS
TREBLE
5
5
4
3
2
l
0
l
2
3
4
5
5
4
3
2
l
0
l
2
3
4
ON
OFF
BASS
EXTENSION
TON
BYPA
ON
OFF
ASS
ENSION
TONE
BYPASS
BASS
EXTENSION
ON
OFF
RX-V592
RX-V692