Funktioner, Start the motor of the sharpening machine, Chain rulers – Sliprobot L1 User Manual
Page 7: Start the automatic system, Adjusting the grinding angle 0˚- 35, Electric power (12-14 v dc) in, Grinding wheel, Grinding motor, Power on, Depth adjustment of the grinding wheel
7
Machine operating controls
1. Start the motor of the sharpening
machine.
12. Chain rulers.
2. Start the automatic system.
13. Adjusting the grinding angle 0°- 35°.
4. Electric power (12-14 V DC) in.
14. Grinding wheel.
5. Stop button. (zero-voltage cutout. When
the power is cut off, the machine must
be started manually.)
15. Grinding motor.
7. Power on.
16. Depth adjustment of the grinding
wheel.
8. Stop clamp
17. The graduated scale shows grinding
angles from 90° to 50°.
9. Cutting tooth length setting adjustment. 18. Knob for adjusting the grinding angle
between 90° and 50°.
10. Chain feeder mechanism.
19. The graduated scale shows grinding
angles from 90° to 35°.
11. Centring of length between right and
left cutting tooth.
20. Stop arm
21. Stroke adjustment.
22. Symbols
2
1
4
5
7
8
9
10
11
12
14
15
16
17
18
19
22
21
20
13