Muratec MX-2030 - Manual (Page 184)

5-30 S
CANNING
10
Enter the user name, then press [Enter].
If your machine is on a windows domain controlled network, add the domain
name after the user name with an “@”, like “sam@dom_muratec”.
The user name can contain up to 50 characters.
All ASCII characters are available.
11
Press [Password].
12
Enter the password, then press [Enter].
The password can contain up to 32 characters.
All ASCII characters are available.
NOTE: The entered password is displayed using asterisks.
13
Press [Start].