3M MP8660 - Manual (Page 5)

ENGLISH
3 3M 1997 3M Multimedia Projector MP8660
Section 1: Unpack
1-1. Contents of Shipping Box
The 3M Multimedia Projector MP8660 is shipped with the necessary cables required for standard VCR, PC,
Apple Macintosh or laptop computer connections. Carefully unpack and verify that you have all of the items
shown below in Figure 1-1.
MP8660 Projector Remote Control Transmitter
Video Cable
(S-Video mini DIN4-pin)
Lens Cap
Power Cord
(US, Euro, UK) VGA Cable
(15-15 pin M/M)
MAC Adaptor
3-Conductor
Video/Audio Cable
Serial Mouse Cable
ADB Adaptor Cable PS/2 Adaptor Cable Gender Changer
RCA to Stereo mini
jack Hexagon
Wrench
Figure 1-1. Inventory of Shipping Box
The following items are optional and are not packed with the projector:
t RS-232 Control Cable
t SVGA MAC Monitor Adaptor
t VGA MAC Monitor Adaptor
1-2. Keep Your Packing Materials
Save the shipping box and packing materials in the event the MP8660 should require shipping to a 3M Service
Center for repair. Check the projection lens, it should be fully retracted to prevent damage during shipping.
Note
The projection lens must be completely retracted to
protect it during shipping. If the AUTO RETRACT
feature has been disabled, the lens will not retract
automatically. Press the ZOOM
arrow and
FOCUS
B
arrow to retract the lens manually.
1-3. What’s Next?
After you have unpacked the MP8660 system and identified all the parts, you are ready to set up the projector.
Take a few minutes to review Section 2 to familiarize yourself with the MP8660 machine characteristics and
then turn to Section 3 to set up the projector.