Graco 234418 Membrane Air Drying System - Manual

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Copyright 2003, Graco Inc. is registered to I.S. EN ISO 9001
309920C
Instructions - Parts List
Membrane Air
Drying System
Model 234418
Maximum Working Pressure 160 psi (1.1 MPa, 11 bar)
Maximum Temperature 150° F (65° C)
Includes:
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions
Part No. Description
Air Inlet
npt(f)
Air
Outlet
npt(f)
Air Flow
Capacity
Maximum
Operating
Pressure
234402 Stage 1 - Air Filter with auto drain
Removes water and contaminants down to
5 microns. 1/2” 1/2” 108 CFM 175 psi
(1.2 MPa, 12 bar)
234397 Stage 2 - Coalescer with auto drain
Removes oil and sub-micronic particles
down to .01 microns. 1/2” 1/2” 70 CFM 175 psi
(1.2 MPa, 12 bar)
118560 Stage 3 - Membrane Air Dryer
Removes uncondensed moisture. 1/2” 1/2” 30 CFM 175 psi
(1.2 MPa, 12 bar)
234394 Self Relieving Air Regulator 3/8” 1/4” 100 CFM 160 psi
1.1 MPa, 11 bar)
288798 Shut-off Valve