FIAT 500 User Manual
Page 120
119
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
INDEX
YOUR CAR
SAFETY DEVICES
CORRECT USE OF THE
CAR
IN AN
EMERGENCY
❒ if at least 1.8 bar pressure is read, re-
store proper pressure (with engine
running and handbrake on) and restart;
❒ drive with the utmost care to the near-
est Fiat Dealership.
Remember to inform the
workshop that the tyre has
been treated with a quick repair kit.
Give the instruction booklet to the
tyre repair workshop personnel.
WARNING
fig. 17
F0S0124m
fig. 18
F0S0125m
FOR CHECKING AND
RESTORING PRESSURE ONLY
The compressor may also be used for
restoring pressure only. Release the quick
coupling and connect directly to the tyre
valve fig. 17; in this way, the cylinder will
not be connected to the compressor and
no sealant will be injected.
CYLINDER REPLACEMENT
PROCEDURE
To replace the cylinder proceed as fol-
lows:
❒ disconnect connection A-fig. 18;
❒ turn counter-clockwise the cylinder to
replace and raise it;
❒ fit the new cylinder and turn it clock-
wise;
❒ connect connection A to the cylinder
and fit the transparent tube B into the
proper space.