FIAT 500 - Manual (Page 19)

❒ press button – : (Off) will flash on the display;
❒ press the MENU ESC button briefly to return to
the menu screen or give the button a long press
to return to the standard screen without storing.
Trip B data (Activating Trip B)
With this function is possible to turn the Trip B
display (trip meter) on and off.
For further information see “Trip computer”.
Proceed as follows to switch the function on and off:
❒ press the MENU ESC button briefly, the display
will flash On or Off depending on the previous
setting;
❒ press button + or – to set;
❒ press the MENU ESC button briefly to return to
the menu screen or give the button a long press
to return to the standard screen without storing.
Time adjustment (Clock adjustment)
This function enables to set the clock through two
sub-menus: “Time” and “Format”.
To carry out the adjustment, proceed as follows:
❒ briefly press MENU ESC: the display will show the
two submenus “Time” and “Mode”;
❒ press the button + or – to switch between the
two submenus;
❒ once the submenu to be modified has been
selected, briefly press the MENU ESC button;
❒ when you select “Time”, pressing MENU ESC
briefly makes the "hours" flash on the display;
❒ press + or – to set the value;
❒ briefly press MENU ESC: the “minutes” will flash
on the display;
❒ press + or – to set the value.
Note The setting will increase or decrease by one
unit each time the button + or – is pressed. Hold
down the button to increase/decrease the setting
rapidly and automatically. Complete the setting
by briefly pressing the button when you approach the
required value.
❒ when you select “Mode”, pressing MENU ESC
makes the mode flash on the display;
❒ press button + or – to select “24h” or “12h mode.
When you have made the required adjustments,
press MENU ESC to go back to the submenu
screen or hold the button down to go back to the
main menu screen without saving.
❒ again, give the MENU ESC button a long press to
return to the standard screen or to the main
menu according to the position in the menu.
Set date (Setting the date)
Using this function it is possible to update the date
(day - month - year).
Proceed as follows to update:
❒ briefly press MENU ESC: “year” will flash on the
display;
16
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX