Changing a flat tire – HONDA 2010 Pilot User Manual
Page 514
Advertising
The spare tire is stored
underneath the rear cargo area.
Remove the plastic cover and the
rubber cap on the cargo area
lining to access the shaft for the
spare tire hoist.
Put the extension with the wheel
nut wrench on the hoist shaft.
Turn the wrench
counterclockwise to lower the
spare tire to the ground.
The tools and jack are under the
cargo area behind a cover on the
passenger’s side. Remove the
cover and take the jack out of the
tool kit case.
Fold down the third row seat (see
page
).
5.
6.
7.
8.
Changing a Flat Tire
510
COVER
KNOB
PLASTIC COVER
WHEEL NUT
WRENCH
The wheel nut wrench supplied with
your vehicle is specially adapted to f it
the hoist shaf t. Do not use any other
tool.
2010 Pilot
Advertising
This manual is related to the following products: