JVC GR-DVL300 - Manual (Page 8)

8
EN
CONNECTIONS
WHEN CONNECTED TO A VCR EQUIPPED WITH A JLIP JACK
When JLIP Video Producer is used:
When JLIP Video Capture is used:
To PC jack
To S OUT jack
S-VIDEO cable
AUDIO/VIDEO cable
To S-VIDEO
input jack
To JLIP jack
JLIP cable
To JLIP jack
PC connection cable
PC
To COM port
(RS-232C)
Video Camera
VCR
(Recording deck)
White to
AUDIO L
Red to
AUDIO R
To AV jack
Yellow to
VIDEO
Ⅲ To assure safety, make sure all units are turned off before making any connections.
Ⅲ We recommend that you use the AC Power Adapter/Charger.
Ⅲ When a core filter is attached to a cable, be sure to plug the connector equipped with the
core filter into the video camera.
Ⅲ Do not make any connections to the video camera’s DV OUT connector.
Connect this if the video
source unit has an S-Video
input jack.
NOTE:
The JLIP cable can only be
used with JVC VCRs equipped
with a JLIP jack.
If your VCR has a SCART
connector, use the cable
adapter.