Activeforever RemRest 901 CPAP Machine - Manual (Page 12)

12 RemRest
motor vehicle or recreational vehicle,
insert the plug into the DC jack located on
the back of the CPAP and plug the other
end into the vehicle’s 12V DC outlet.
3. The green light (on/off light) will turn on
for two seconds then will remain off until
the motor/blower is turned on. The LCD
will also turn on completely (as shown in
Symbols Definition section on page 13)
for 2 seconds and will then switch to
display the prescription pressure. The
display will illuminate and show the
pressure setting and icons based on the
last settings saved. If the ramp function
was used the last time the device was
operated, then the ramp icon will
be illuminated on the LCD indicating the
ramp mode is still active. The display will
show the prescription pressure setting in
cmH2O. The PRES icon will be on.
NOTE:
For Tier 3 only, the TIME icon on the
LCD may be flashing. See the AUTO MASK
CHANGE section on page 15.
ON/OFF
LIGHT
NOTE
Running the RemRest off
your vehicle battery
(12V DC) without the
engine running may drain
the battery.