Garmin GPSMAP 180 - Manual (Page 41)

A B
• Setup Page Display?— allows you to specify the number of fields displayed in the
data window section of the map page. A graphic compass tape or CDI scale may
also be displayed. The following options are available:
• 2 Fields • 2 Fields & Compass
• 2 Fields & CDI • 4 Fields
• 4 Fields & Compass • 4 Fields & CDI
• 6 Fields • 6 Fields & Compass
• 6 Fields & CDI • 8 Fields
To select a page display option:
1. Highlight the ‘Setup Page Display?’ option and press T .
2. Select the desired option and press T .
• Change Data Fields?— allows you to specify the data displayed in each data field
used on the map display. The following options are available:
• BRG- bearing to active wpt • DIS- distance to active wpt
• SOG- speed over ground • COG- course over ground
• ETE- estimated time enroute • ETA- estimated time of arrival
• XTK- crosstrack error • VMG- velocity made good
• TRN- turn angle to wpt • WPT- active wpt name
To change a data field:
1. Highlight the ‘Change Data Fields?’ option and press T .
2. Move the field highlight to the desired field and press T .
3. Select a data field option and press T .
• Restore Defaults?— resets all map page options (except map configuration options,
see pages 27-28) to the factory settings.
• Setup Simulator?— allows you to define speed, course, and position values while in
simulator mode. See the Getting-Started Tour for more on using simulator mode.
29
A. The map page can be configured to display a
variety of navigation data.
B. Each data field can be set to display one of ten
data options.
SECTION
3
MAP PAGE
Page Display
& Data Fields