AASTRA SIP-DECT (Release 3.0)- OM System Manual - Installation, Administration and Maintenance EN - Manual (Page 81)

SIP–DECT OM System Manual Release 3.0 7 OMM Web Service
Aastra depl-1624/1.0 Page: 81 (241)
as the channel and the antenna configuration. These settings are defined separately for each
RFP (see chapter 7.6.3).
7.8.1.1 Creating and Changing WLAN Profiles
You need at least one active WLAN profile in order to operate the WLAN function for an
RFP (L) 42 WLAN or RFP (L) 43 WLAN device.
1 Navigate to the WLAN profiles page. This page shows the number of existing WLAN
profiles and a list of available WLAN profiles.
2 If you create a new WLAN profile, configure the RFP type first to get the correct input
fields. Select the appropriate profile ( RFP42 or RFP43 ) from the WLAN profile type
selection list.
3 To add a new WLAN profile, press the New button. To change an existing WLAN profile,
click on the icon available on the left of the WLAN profile entry.
The New WLAN profile page resp. the WLAN profile [Number] page shows the WLAN
profile configuration.