Concord TRANSFORMER XT INSTRUCTION MANUAL User Manual
Page 7
33
_ INSTALLING THE CONCORD TRANSFORMER
Place the CONCORD TRANSFORMER on the car seat or
bench seat, facing in the direction of travel.
The CONCORD TRANSFORMER should lie flush with
the seat. In cars with standard headrests, these may be
adjusted or removed to make it easier to install the child car
seat.
Please note that the car headrests must be replaced and
re-positioned correctly when an adult is travelling in the car.
The seat may not be transported unsecured in the vehicle,
even if there is no child passenger. Otherwise passengers
risk injury during the journey or in the event of an accident.
For this reason, the belt must always be fastened when
travelling.
_ USING THE CONCORD TRANSFORMER
You have decided to purchase our CONCORD TRANSFORMER seat for the safety
of your child. This product is manufactured under strict quality controls. It can only
effectuate its maximum safety properties if it is used properly. The cover is an important
component and contributes to the seat’s effectiveness; for this reason the seat must
only be used with its original cover! You should therefore ensure that you follow the
instructions for fitting and use carefully.
The seat may be used on any seat in your car that is fitted with a three-point seat belt.
Statistics suggest that the place behind the passenger seat is the safest in the car.
32