EVS XEDIO CleanEdit Version 4.1 - December 2011 User Manual - Manual (Page 120)

Issue 4.1.B Xedio Suite Version 4.1 – User’s Manual – CleanEdit
EVS Broadcast Equipment – December 2011
106
7.2 SELECTING TECHNIQUES
7.2.1 S
ELECTING A
C
LIP
To select an element of a clip, move the mouse onto it and click.
The color of the selected element will change to a dark blue (or as defined in
Xedio Manager, via Software > Parameter Profiles > (Xedio) CleanEdit: TL Colors
tab).
To select multiple elements for a common operation, use the CTRL key for non-
contiguous elements and SHIFT key for contiguous elements.
7.2.2 S
ELECTING
E
LEMENTS
D
EPENDING ON
N
OWLINE OR
M
ARK
P
OSITIONS
The following table shows how you can select elements from the nowline, up to the
nowline or between the mark IN and mark OUT. In all cases, the selection will be
performed on entire elements, not from the mark positions:
To select all elements
(entire elements) … Proceed as follows:
from the nowline
up to the end of the edit,
Click or press .
from the beginning of the edit
up to the nowline,
Click + or
press +
between the mark IN and mark OUT
Click + or
press +