EVS XEDIO Ingest Organizer Version 4.2 - June 2012 User Manual - Manual (Page 17)

Xedio Suite Version 4.2 - User Manual – Ingest Organizer
EVS Broadcast Equipment – June 2012
Issue 4.2.B
11
3.3.2 G
ENERAL
T
AB AND
M
ETADATA
T
AB
These areas have the same fields as the encoder control window. Please refer to
sections ‘General Tab’ on page 7 and ‘Metadata Tab’ on page 7 for a description
of those areas.
3.3.3 C
HANNEL
A
REA
This parameter allows the user to connect to the logical channel that has been
assigned to ingest the media from the tape in the VTR. Choose the channel and
click the Connect button to establish the communication.
3.3.4 VTR A
REA
The VTR area provides transport buttons to control the VTR as well as In and Out
buttons to mark sections of the tape to ingest.
The Record Timecode area allows the user to choose between the existing
timecode on the tape or the external source of timecode connected to the encoder
when the encoding is performed.
Each area of tape can be determined and added to a list using the Add In List
button. When the selection from the tape is complete, the ingest is started by
clicking the Start Batch button.