EVS XEDIO Browse Version 4.2 - June 2012 User Manual - Manual (Page 19)

Xedio Suite Version 4.2 – User Manual - Xedio Browse
EVS Broadcast Equipment – June 2012
Issue 4.2.B
13
• From the Media tab, double-click the media to load
or
from the Virtual Media pane, double-click the virtual media to load.
At the same time, the Tabs Pane will switch to the Virtual Media Properties tab.
2.3.6 P
LAY
M
EDIA IN THE
A
DDITIONAL
P
LAYER
It is also possible to load media or virtual media on an additional Player window.
To do so, right-click on a media or virtual media and select Play from the
contextual menu. The media or virtual media cannot be modified using this player
but can be viewed while another piece of media is still loaded within the Player
pane.
To start or stop the playout, click within the video area of the window or press the
Space bar.
The Media and Jog bars at the bottom of the window can be used as in the Player
pane. Refer to section 2.3.4 ‘Media and Jog Bars’ on page 10.
The video and audio tools can be used as described in section 2.3.3 ‘Video and
Audio Monitoring Tools’ on page 9.