Panasonic AW-RP555 - Manual (Page 20)

19 (E)
Connections
 Use the AW-PS505A (sold separately) AC adapter for this unit and the AW-PS300A
(sold separately) for the pan/tilt head.
 Use a DC power cable (which has a nominal cross-sectional area of at least 1.25 mm 2
and which complies with the Electrical Appliance and Material Control Law) to connect
the AW-PH360 pan/tilt head and AW-PS300A AC adapter.
The maximum extension distance between the AC adapter for the pan/tilt head and the
pan/tilt head itself is 30 meters.
 Connect the AW-PH360 pan/tilt head and convertible camera using the camera cable
supplied with AW-PH360.
 Connect the iris control cable of the motorized zoom lens to the camera and the remote
(zoom/focus control) cable to the pan/tilt head.
 When using the AW-PH360 as the pan/tilt head, set the controller selector switch on the
AW-PH360 to “For AW-RP605A”.
For further details on how to connect each component, refer to the operating instructions
of the component concerned.
Turn off the power of all components before proceeding with the connections.