Hotchkis 22815 Audi Allroad Sport Sway Bar Set - Manual

Audi Allroad
#22815
Front and Rear Sway Bar Kit Installation
Instructions
Tools Required:
Included In Kit:
1) 4-Post Lift or Floor Ramps 1) front and rear anti-roll bars
2) 13mm socket 2) 4 bushings & 4 brackets
3) 13mm wrench 3) 2 front bushing mounting plates
4) 8mm Allen Socket 4) (4) 8mm washers (rear brackets)
5) (2) 16mm wrenches 5) (2) 10mm washers
6) 3/8” drive extension (long) *optional 6) 1 grease pack
7) T30 Torx Socket *optional
8) Blue Threadlocker
START WITH THE REAR BAR
1/
Drive the vehicle onto a 4-post lift or floor ramps. T HE CAR NEEDS TO BE AT
NORMAL RIDE HEIGHT FOR PROPER INSTALLATION . You cannot have the suspension
hanging while installing this bar!
2/
Once vehicle is raised, take a moment and observe the stock rear bar
and the way in which it is mounted
.
3/ Release rear exhaust hangers and middle hangers then let hang. (ok to
use small amount of WD40 to loosen) Or, you may unbolt the hanger brackets
using an extension and 13mm socket.