Manhattan 177603 2D Barcode Scanner - Manual - Manual (Page 7)

Level + Flashing
This mode allows you the switch between Level and Flashing modes. When
the scanner is turned on, it is in Flashing mode (see Flashing below). You can
automatically switch to Level mode by activating the beam line. After a period
of inactivity equal to the time specified by the timeout, the scan engine
switches back to Flashing mode.
Flashing
Flashing mode activates the lighting and decoding function (no need to
activate the trigger line). After a period of inactivity equal to the time specified
by the trigger timeout, the scanner starts flashing, checking for a barcode to
be read. When a barcode is detected, the lighting and decoding automatically
turn on and stay on until another period of inactivity (timeout), after which
the scanner starts flashing again.
Autostand
This mode allows you to switch from Flashing trigger mode to Level trigger
mode. Autostand begins in Flashing mode: At power-up, the lighting and
decoding are on (no need to activate the trigger line) and after a period of
inactivity equal to the time specified by the trigger timeout, the scanner
starts flashing. To switch to Level trigger mode, activate the trigger line
(press the trigger). When in Level trigger mode, after a period of inactivity
equal to the time specified by the trigger timeout, the scanner switches back
to Flashing mode.
7
OPERATING SETTINGS