Listening to usb playback, Repeat, Random play – Naxa NPB-429 User Manual
Page 8: Aux-in operation
7
REPEAT
To Repeat a Single Track
1. Press MODE button during play, “ ” shows steady on the display. The current track will be
played over and over again till you press the STOP button.
2. To cancel repeat play, press MODE button until “ ” disappears from the display.
To repeat all the Tracks
1. Press MODE button until the “ ” shows steady on the display, all tracks on the disc will be
played over and over again till you press the STOP button.
2. To cancel repeat play, press the MODE button until “ ” disappears from the display.
To repeat the folder (only for MP3 disc which contains more than one folder)
1. Press the MODE button until “ ” and the folder logo (For Example ) show steady on the
display, the current folder will be repeated over and over again till you press the STOP button.
2. To cancel repeat play, press the MODE button until “ ” and the local folder disappear from the
display.
RANDOM PLAY
Press the MODE button in play mode till the “RAND” shows steady on the display, the random play will
start from next track automatically, until all tracks are played over and then stop. Press the MODE button
control again until the “RAND” disappears from the display to cancel.
AUX-IN OPERATION
This unit has provided special AUX jack(φ3.5mm), through this jack other audio sources can be
connected to this unit and be amplified.
1. Press the FUNC. button to AUX position.
2. Connect the audio cable into the AUX IN jack and the other end to the AUDIO OUT jack of the
external audio source. The unit will change to AUX mode automatically.
3. Press PLAY of the external audio source to start playback.
4. Adjust the volume of the main unit to your desired level.
LISTENING TO USB PLAYBACK
1. Press the FUNCTION button to USB mode.
2. Connect the USB to the USB INPUT. The LCD will display total number of tracks stored inside the
USB.
3. The unit will start playback from track 1 after reading finished.
To interrupt playback, press the button. The “ ” indicator and the current track will flash
on the display.
To resume playback, press the button again.
4. Press the STOP button to stop playing. The display will show total number of tracks.
5. Proceed repeat play (repeat 1/repeat folder/repeat all)/program play/random play/skip up and down
operation as the same described in above “USING THE USB/MP3”.
CAUTION:
Do not use any USB extension cable for connecting the USB stick which may cause harmful
interference
In case of malfunction due to electrostatic discharge, just reset the product (reconnect of power
source may be required) to resume normal operation.